The INOVA HIGHTECH AMMPS MEP 10x0 Auto Starter Kit is a great add on for your MEP Generator Set.

It will allow remote start with the flip off a switch or it can be connected to an Automatic Transfer Switch.

This Kit will work for all AMMPS MEP's: 1030, 1040, 1050, 1060, 1070

with or without winterization kit and remote monitoring PC Software

• Our Auto / Remote Start Kits have been available since the end of 2013.
• We are the Manufacture of all our INOVA HIGHTECH Ltd. Remote / Auto Start Systems
• We cover all MEP makes and models.
• Highly Reliable Systems in operation with Military, Fire and Police Departments who depend on 100% reliable operations and up time.
• Self Contained Unit which prevents restart in case of generator error / failure to prevent further damage by restart attempts.
• Wide Operating Range: -40C to 80C / 100% Humidity.
• Optional Extended Operating Range:: -55C to +125C / 100% Humidity.
• Highest Quality Components.
• Unsurpassed in reliability, quality and ruggedness.
• Meets and exceeds MIL-STD.
• Each Kit is custom assembled, programmed and conformal coated when purchased to increase shelf life.
• Our PCB’s are gold plated and made in the USA in Illinois.
• If you want the best, then this is your system.

The MEP 10x0  Auto Starter has the following features which can be set with the DIP Switch on the Board:

DIP Switch 1:   Regular Fuel / Aux Fuel
DIP Switch 2:   Warm Up Time 1 min or 5 min (This is the time delay before the Relay "Power On" is activated. This Relay switches the Control Voltage to the 3 Phase Contactor "On" and connects the LOAD to the Generator)
DIP Switch 3:   Cool Down 1 min or 5 min
DIP Switch 4:   Not Used
DIP Switch 5:   Special Purpose

The MEP 10x0 Autostarter KIT includes:

1. AMMPS MEP 10x0 Autostarter Circuit Board

2. MIL-I-46058C Conformal Coating

3. Drill / Mounting Templates (Circuit Board Only)

4. Detailed Installation Manual (download via dropbox)

5. 24 feet 16ga standard multi stranded SXL wire, strong resistance to moisture, solvents and prolonged high heat -
    Thick wall special purpose automotive wire is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257°F

6. Mounting Hardware for PCB:

    4pcs Stainless Steel Phillips Pan Head Machine Screws #6-32x0.75",

    8pcs Stainless Steel #6-32 Nuts as Spacers,

    4pcs Stainless Steel #6-32 K-Lock Nut's

7. Mounting Hardware for Amphenol Receptacle:

    4pcs Stainless Steel Phillips Pan Head M2.5x0.45 L: 14mm Screws

8.  Silicone O-Ring to seal all Rear Amphenol Receptacles:

    20pcs Silicone O-Ring, ID 2.5mm OD 4.1mm Temp -80C to +500C

9. Wiring Harness with 10 PIN Male Amphenol Receptacle, MIL-STD, 22ga Type 2 Airframe Wire MIL-STD, Spark tested, U-Lugs #6, Printed Wire Numbers, 

10. Wiring Harness with 10 PIN Female Amphenol Right Angled Plug MIL-STD, 16ga Type 2 Airframe Wire MIL-STD, Spark tested, O-Lugs #6, Printed Wire Numbers, 

11. 1pcs Gasket for Amphenol Receptacle 

12. Crimp On Ring Lugs #6 / #8

13. 2pcs 24VDC Relays with Panel mountable socket and clips

14. 4pcs 3M 14 AWG, Blue, IDC, Inline, Pigtail & Tap Quick Splice Connector

15. 1 Year Limited Warranty

Optional Tool Kit:

1. 2.15mm  HSS Drill

2. M2.5x0.45 Spiral Flute Tap

3. 1" Hole Saw (HSS)

4. 3mm Center Punch

Optional 50pcs Silicone O-Ring Set available