The INOVA HIGHTECH MEP 004A / 005A / 006A / 007A/B Autostarter Kit is a great add on for your MEP Generator Set. It will allow remote start with the flip off a switch or it can be connected to an Automatic Transfer Switch.

• Our Auto / Remote Start Kits have been available since the end of 2013.
• We are the Manufacture of all our INOVA HIGHTECH Ltd. Remote / Auto Start Systems
• We cover all MEP makes and models.
• Highly Reliable Systems in operation with Military, Fire and Police Departments who depend on 100% reliable operations and up time.
• Self Contained Unit which prevents restart in case of generator error / failure to prevent further damage by restart attempts.
• Wide Operating Range: -40C to 80C / 100% Humidity.
• Optional Extended Operating Range:: -55C to +125C / 100% Humidity.
• Highest Quality Components.
• Unsurpassed in reliability, quality and ruggedness.
• Meets and exceeds MIL-STD.
• Each Kit is custom assembled, programmed and conformal coated when purchased to increase shelf life.
• Our PCB’s are gold plated and made in the USA in Illinois.
• If you want the best, then this is your system.

Please contact us via text (913) 416 0462 or through our Contact Us Page to request the Installation Manual!
 

The Autostarter Board KIT for the 004A/005A/006A/007AB is the same as for the 002A/003A

Except that the 004A/005A/006A version has a different Software loaded!

The 004A/005A/006A Software affects/changes the following functions / Terminal Nomenclature:

1.             Dip Switch Functions, Settings and Timing

2.             Different Connections between the Board and the Cubicle

3.             No external Contactor needed [utilizing internal CB2]

4.             No Pre Heat - Pre Heat Output is used for Ether Injection instead

5.             Ether Injection selectable On/Off with 5 sec or 15 sec of injection time

                Select Ether Injection only if your Ether system is working correctly!

6.             No ambient temperature dependent timing

7.             The Aux Fuel Output is now used to fill the Day Tank for 30 or 60 seconds and to pressurize the fuel system

8.             The RUN/PRIME Output is now only a RUN OUTPUT

9.             The Oil P / TEMP Input will now additionally monitor Over Voltage and Low Fuel, besides Oil Pressure and Over Temperature

All other instructions from the MEP 002A/003A Manual apply for these Gen Sets as well

The MEP 004A / 005A / 006A Autostarter has the following features which can be set with the DIP Switch on the Board:

The Autostarter will automatically shut down and display a light indicator in the event of a Low Oil Pressure, Overheat, Over Voltage and Low Fuel situation, preventing the Generator Set from automatically restarting. The Autostarter can easily be reset, once the issues of leading to Low Oil Pressure, Overheat, Over Voltage and Low Fuel situation have been fixed/corrected.

The installation requires a working knowledge of the MEP 004A/005A Electrical System.

The MEP 004A / 005A / 006A / 007AB Autostarter KIT includes:

1. MEP 004/005/006/007 Autostarter Circuit Board
2. MIL-I-46058C Conformal Coating
3. Drill / Mounting Templates
4. Detailed Installation Manual
5. 15 feet 16ga standard multi stranded SXL wire, strong resistance to moisture, solvents and prolonged high heat -
    Thick wall special purpose automotive wire is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257°F
6. Mounting Hardware [Stainless Steel Phillips Pan Head Machine Screws #6-32x0.75", Stainless Steel #6-32 Nuts as Spacers, Stainless Steel #6-32 K-Lock Nut's]
7. Crimp On Ring Lugs
8. A 60 Day Money Back Guarantee
9. 1 Year Limited Warranty
10. 15 Amp Diode Pack


MEP004A installation Pictures of our Board Kit as courtesy of our Valued Customer AL HEIDEMANN of LODI, WI who installed one of our MEP 004A/005A/006A/007AB Autostarter Kits on his MEP004A Generator Set.
Al was instrumental in making this Kit possible for the MEP 004A/005A/006A/007AB Series! Thanks Al!